Polylok offers a wide variety of mandrels to fit our seals. Combining mandrels or cutting them to size allows you to accommodate wall thickness from 1½” – 9”. Note: Mandrels should be cut 1/8” less than your wall thickness. Polylok’s mandrels are made from a polypropylene composite, allowing them to maintain their shape even during the most […]
Polylok – 4″ Mandrel For Boot Seal- 3004-OE Read More »
Polylok offers a wide variety of mandrels to fit our seals. Combining mandrels or cutting them to size allows you to accommodate wall thickness from 1½” – 9”. Note: Mandrels should be cut 1/8” less than your wall thickness. Polylok’s mandrels are made from a polypropylene composite, allowing them to maintain their shape even during
Polylok – 2″ Mandrel For Boot Seal – 3006-M Read More »
The first and only patented Closed Ended Boot Seal on the market. The Poly III makes it easy to vacuum test because there are no openings to plug. It accepts either 3″ or 4″ pipe. It also meets ASTM C-923 specifications and can fit in a 2 1/2″ -6″ wall. Details Accepts 3″ or 4″
Polylok – Poly III High Pressure Closed End Boot Seal – 3003-B (case of 50) Read More »
When a friction fit is important, you can count on the Polylok 4″ Compression Seal. It is used to ensure a watertight connection when installing 4″ SCH. 40 or SDR. 35 pipe into black ribbed pipe or IPEX pipe. Details Easy to install – no tools required Accepts 4″ SCH. 40 and SDR. 35 pipe
Polylok – 4″ Compression Seal – 3002-CS (case of 200) Read More »
Ideal for use with 12″ Corrugated or ribbed pipe. These 12″ grates are made of HDPE with the highest UV Protection on the market today. These grates will withstand normal residential and light commercial traffic. Details Skid resistance surface Available in green The highest level of UV Protection included Manuals
Polylok – 12″ Grated Cover for Corrugated Pipe – 3004-GR Read More »
Ideal for use with 12″ Corrugated or ribbed pipe. These 12″ covers are made of HDPE with the highest UV Protection on the market today. These covers will withstand normal residential and light commercial traffic. Details Skid resistance surface Shipped with factory-installed gaskets Available in green The highest level of UV Protection included Square drive
Polylok – 12″ Cover for Corrugated Pipe – 3004-C Read More »
Ideal for use with 15″ Corrugated or ribbed pipe. These 15″ grates are made of HDPE with the highest UV Protection on the market today. These grates will withstand normal residential and light commercial traffic. Details Skid resistance surface Available in green The highest level of UV Protection included Manuals
Polylok – 15″ Grated Cover for Corrugated Pipe – 300415-GR Read More »
Ideal for use with 15″ Corrugated or ribbed pipe. These 15″ covers are made of HDPE with the highest UV Protection on the market today. These covers will withstand normal residential and light commercial traffic. Details Skid resistance surface Shipped with factory-installed gaskets Available in green Highest level of UV Protection included Available with a
Polylok – 15″ Cover for Corrugated Pipe – 300415-C Read More »
Polylok POLY IV Open-Ended, High-Pressure Seal with a clamp. This seal meets or exceeds all the ASTM C-923 requirements. Poly IV Open End Boot Seal meets or exceeds all requirements of the following standards, codes, specifications, and/or test methods: ASTM C 1227 ASTM C 1644 ASTM C 923 ASTM C 1244 NPCA Best Practices NOWRA
Polylok – 4″ Poly IV High Pressure Open End Boot Seal – 3003-OE (case of 25) Read More »
Need to vacuum test or water test your tanks? This Polylok closed-end boot is the best seal today for vacuum testing and water testing tanks. It is designed with a closed-ended, so it is no longer necessary to plug seal holes before testing. And it’s easy to cut the seal at the installation site. In
Polylok – 4″ Poly IV High Pressure Closed End Boot Seal – 3003-CE (case of 25) Read More »
